The flex fob was part of our solution to making our 1996 garage door openers work again. Clipped it to my visor and everything works with a simple button press now. I really appreciated how there was a direct connection to the garage opener in addition to being able to work over the hub network.

I installed this on one of my pool gate. As soon as the gate opens I get a notice on my phone. “Gate is open”. It also lets you set a reminder that the gate is still open. You choose the time span. It’s really cool that you could add a siren to the gate also; if need . I didn’t do that yet. I will be adding more sensors to the other two gates. Easy to install. I highly recommend this sensor if you have pool gates or any other sensitive doors and gates you want monitored.

DATA LOG FEATURE IS GREAT!

I bought my first one just to see if it really would work in my off grid vacation property. I have two fridges so after seeing how well they performed I ordered three more. They are all connected to one hub and now I could keep track of the temperature in the two refrigerator freezers on the property. To let you know how they perform I have sense ordered three additional thermostats and another hub for my refrigerator freezer and freezer in my main house. Yes I think they’re great products

in my main house. It’s all about peace of mind.

I have my well fill my 6000 gallon tank each night for 10 minutes every hour from 10 PM until 6 AM. (don't want to run the well hole dry). I have an electric solenoid valve that controls the tank fill. It's timed with a Yolink outdoor Plug Schedule.
The tank has a float that cuts off the well fill valve when the tank is full. That works great. So, as a backup, I put the Sensor 3 Probe in a 45º conduit fitting so any tank condensation wouldn't drip on the sensor. Then mounted the conduit/sensor through a hole near the top of the tank at a location just above where the float turns off the well-fill valve.
So, if for some reason, the float hangs up or doesn't work, the sensor will turn off the fill valve.
The Yolink Automation settings are settings are:
"When" Leak Sensor has Water Leak Alert, "Then" Turn off Tank Fill Plug/Valve.
Alarm Strategy: Default.
Alert Interval: 1 minute.
Delayed Alarm: 2 seconds.
So, with those settings, if water in the tank touches the Leak Sensor, the tank fill valve will turn off. And when the Plug/Valve tries to turn the fill water valve back on again and the sensor is still wet, the valve will turn off in less than one minute (the minimum time available for Alert Interval).
And, it mounts from the outside of the tank so I don't have to try to get my arm inside the tank access hole cover to do anything.
I guess this could be used instead of a float but I like the redundancy of the float and Leak Detector.

Thank you for your excellent service

Works really good

Awesome I love them. I wish I would have done it years ago.

Perfect connection to the valve.

Play plug and play. Automatically integrated. Just stick it up on the door.

Still learning about all the tricks it can do.

We started using the YoLink system after several people we knew had their houses destroyed by water leaks that happened when they weren't home. They are simple and easy to set up. I love the 10-pack because we have a lot of water sources in the house.

Easy to set up and works as designed

I added two more of the Yolink switches to my hub, dimmer, and flex switch. The system works together flawlessly. The switches that have additional programmable buttons (main, and switches 1, 2) are easily programmed with the Yosmart app. Plug and Play when you plug the hub into your existing home internet access system. Highly recommended!

This kit arrived today and, as I've come to expect from Yolink products, it was amazingly easy to configure. Unboxing to working sensor and controller took all of about 15 minutes, and it worked exactly as advertised.