This store requires javascript to be enabled for some features to work correctly.
works awesome
The YoLink Smart Relay works well. But it is not possible to use it with most of the existing controls equipment now installed. That's because it needs to operate as an enable/disable device - rather than a direct control device. Without a N.C. contact I'm now forced to install an additional remote relay that does have N.C. contacts. The YoLink relay then closes it's contacts on command to energize the N.C. relay to break the circuit. It's not an exaggeration to say that not having a N.C. contact measurably increases field installation cost and reduces the value of the Smart Relay.
Looking forward to the local api , but other than that these are great, reliable devices.
The first garage door controller I bought turned out not to be comparable with my opener, Custemoer service exchange it for the “Finger” model right away, and it works great.
Installed the controller so I could remotely open my garage door and start my car in cold weather. Added it to home assistant and integrated it into Apple Home. Now I can also open my garage door with CarPlay. Works great. The only thing I’d improve about the controller is the connection wire as it is stranded wire and pretty delicate. Seems that a single strand wire would work better. Same type and gage as the opener wires.
- YoLink Hub with an internet connection (wired Ethernet or 2.4GHz Wi-Fi)
- Garage Door Opener
- Smartphone or tablet running iOS 9 or higher, Android 4.4 or higher
- Tools Required: Slotted screwdriver
- Installation Difficulty Level: Moderately Easy
SUGGESTED PRODUCTS:
- YoLink Hub is required. Starting your first YoLink system? Consider Garage Door Kit with Hub
- Pair your YoLink Garage Door Controller with the YoLink Garage Door Sensor to obtain the status of the garage door
TECHNICAL SPECS:
- Semtech LoRa RF Module YL09 microcontroller with 32-Bit RISC processor
- Color: White
- Dimensions [L x W x D]: 2.09 x 1.93 x .98 inches (53.09 x 49.02 x 75.69 mm)
- Open/Close Button (Controller)
- Multi-color status LED
- Set button
- Power: 5 Volts DC
- Environmental:
- Operating Temperature Range: -4°F – 122°F (-20°C – 50°C)
- Operating Humidity Range: 10 – 90% non-condensing
- Intended for indoor use only
PACKAGE CONTENTS:
- (1) Garage Door Controller
- (1) Power Adapter
- (1) USB Cable
- (1) Signal Wire
PLEASE NOTE:
- Check your garage door operator for compatibility before purchasing! If Garage Door Controller is not compatible with your garage door operator, YoLink Finger will be 100% compatible. View information about compatibility here.
- Garage door operators can be dangerous if not installed or used properly. Please read the Installation & User Guide before installation and follow all safety recommendations.