This store requires javascript to be enabled for some features to work correctly.
Customer Reviews
Wanted to use it as a passive sensor to see if my sump pump turns on. My pump is 1/2 hp (about 373 watts), it turns on for short bursts < 5s at a time a few times a day. The Smart Plug did not detect any power usage.
Yes it’s great energy monitoring plug. Beats the heck out of more expensive rivals especially if there is no wifi where it’s used because you’re out of range. The range on these from the base is amazing. Now we see how long it lasts. Wish there was a higher amperage one available and a little better app support but it’s still a knockout. If only the app would give a little more data, maybe enough to tell if something is about to fail it would be good. You can tell a lot from changes in energy usage of a device. Any way it’s a great plug. I’ll buy them all day.
The energy monitoring plug works well, but the data output is less than I was hoping for. I have had to piece together what the report means through several exchanges with cust. service (very responsive) and a little forensic data experimentation. A full blown tutorial on how dara is obtained and reported would go a long way -- also would like access to more raw data and a beefed up display. Consistent and defined use of units would be helpful. Finally, a conservative and detailed table of accuracies and limits would be great -- the temp/humidity sensors from YoLink do a better job with that.
.
Paid ~$10 extra vs basic smart plug in order to get power monitoring. Unit does measure and record wattage, but only as an hourly reading. It doesn’t report total power over time, which is what I want to know to determine cost to run any given device. Attached graph shows my refrigerator over several days, where 3 modes are detected: running, standby and defrost, but no total number. The Kill a Watt product offers that functionality as a pure measuring device. This switch would be better if it could borrow the functionality from the Kill a Watt which I suspect could be done with software enhancements only. Hope that helps.
I have a few dozen different YoLink devices and all are well engineered.. This smart plug is one of them. All their stuff fits in together and works very well together. I am customizing my smart home!
INTRODUCTION:
- One smart app-controlled 120V outlet with energy monitoring
FEATURES:
- 12.5 amp output, for power-hungry equipment
- Convenient on/off button for manual control
- Energy-monitoring, with historical logs
- Remote app control and status
- Temporary & portable – install when needed, store or move to a new location as needed
- YoLink Control allows for outlets to be controlled directly by other YoLink devices, without an internet connection
- Alexa and Google voice assistant and IFTTT integration
- YoLink’s industry-leading long range communication
BENEFITS:
- Easily convert one standard 120V outlet into a smart outlet
- Make any 120V-powered device or equipment smart by connecting it to the Smart Plug
- Remotely-control devices from the YoLink app from anywhere at any time
- Take charge of your power bills by identifying power-consuming devices/equipment/appliances in your home. View real-time power consumption, as well as historical usage, displayed as daily/weekly/monthly data
- Potentially lower your power bills by turning off energy-draining appliances, equipment and devices when not in use
- Use the YoLink app to control devices based on your time-of-day and day-of-week schedule
- Use the YoLink app to create custom scenes and automation, such as controlling connected devices when motion is detected (Motion Sensor sold separately)
- Extremely easy and fast installation using the YoLink app with Scan & Play
APPLICATIONS:
- Use the Smart Plug anywhere you need to make a 120V outlet smart
- Popular uses include indoor lighting, fans, coffee makers, nightlights, noise machines
- Additional uses include making your fish or reptile tank smart, by connecting lighting, heat lamps, water filters, and pumps to Smart Plugs
- Use the YoLink smartphone app to remotely power on/off connected 120V-powered devices
SUGGESTED PRODUCTS:
- YoLink Hub is required. Starting your first YoLink system? Consider one of our kits
- Pair your Smart Plug
- with the Motion Sensor and/or Door Sensor, to activate connected lights when motion is detected or a door is opened
- Need multiple smart plugs in one location? Consider or Power Strip
- Prefer a permanently-installed or flush plug, consider our In-Wall Outlet
- For outdoor smart plug applications, consider our Outdoor Plug
- Pair your Smart Plug with the YoLink Remote for hard-to-reach control, adding convenience to your life
REQUIREMENTS:
- YoLink Hub with an internet connection (wired Ethernet or 2.4GHz Wi-Fi). Refer to the Hub user guide for additional information
- Smartphone or tablet running iOS 9 or higher, Android 4.4 or higher
- Tools Required: None
- Installation Difficulty Level: Super Easy
TECHNICAL SPECS:
- Semtech® LoRa® RF Module YL09 microcontroller with 32-Bit RISC processor
- ETL-Listed
- Color: White
- One Power (On/Off) control button
- Multi-color status LED
- AC Input Power: 100 – 120V AC, 60Hz, 12.5A
- AC Output Rating: 100 – 120V AC, 12.5 Amps Max. (Resistive)
- Dimensions [L x W x D]: 3.19 x 2.01 x 1.62 inches (81.0 x 51.1 x 41.1 mm)
- Environmental:
- Operating Temperature Range: 32°F – 104°F (0°C – 40°C )
- Operating Humidity Range: 10% – 90% non-condensing
- Intended for indoor use only
PACKAGE CONTENTS:
- (1) YoLink Smart Plug
- (1) Quick Start Guide
PLEASE NOTE:
- YoLink products work only in the USA and Canada
- The Smart Plug is packaged with a quick start guide only. Please download the current Installation & User Guide
ADDITIONAL RESOURCES:
- YoLink Website: http://www.yosmart.com/
- YoLink Facebook page: https://www.facebook.com/YoLinkbyYoSmart
- YoLink YouTube channel (under construction): https://www.youtube.com/c/YoLinkbyYoSmart
- Questions? Need system design assistance? Contact a System Architect via email: Compose Email to YoLink