Powered by LoRa ("Long-Range") technology, by Semtech, low power, 900 MHz band, Chirp Spread-Spectrum, wireless let's you take your smart devices where it was not possible before! Learn more
This store requires javascript to be enabled for some features to work correctly.
*** A hub is required for full functionality! ***
Frequently purchased with:
Included with your purchase:
- INCLUDED
- REQUIRED
(1) Valve Controller 2
(4) AA Batteries
(1) Plug-in AC/DC power adapter w/59" (1.5m) cord
(1) DN Series motorized valve
(1) Quick Start Guide
YoLink Hub or SpeakerHub (for full functionality)
Apple or Android phone or tablet (for full functionality)
- COMPATIBLE WITH
- LIMITATIONS
This product is Compatible with:
- PAYMENT
- SHIPPING
- STORE PICK-UP
We accept the following forms of payments for non-commercial purchases:
We accept the following forms of payments for direct, bulk, commercial, B2B purchases:
Check, e-check, bank transfer, Zelle, only.
The following shipping options are available for domestic (continental U.S. destinations):
USPS Economy, USPS Priority Mail, USPS Priority Mail Express, UPS Ground, UPS 2nd Day Air, UPS Next Day Air, UPS Next Day Air Saver
The following shipping options are available for international destinations:
DHL, UPS
Information regarding importing fees, tariffs, etcetera, can be found on the checkout page.
Questions? Email us at service@yosmart.com or call 831-292-4831
15375 Barranca Parkway
Our phone number is:

Visit the Water Control & Shut-Off page for more information on our products for control and distribution of water:
Visit the Smart Water Leak Protection System page to learn about automatically shutting off the water on leak detection:
Visit the Smart Water Solutions page to learn about our entire line of water-centric products:
Technology
LoRa®
Longest Range, by Far!
Up to 1/4 mile open-air range is possible! Over 400% longer range than standard WiFi, Zigbee and Z-Wave protocols. Learn more
Wire Less
Low Power Benefits
Device-to-Device
Water Control & Shut-Off
For even more information on smart valves, valve controllers and other water control products, click here
Smart Water Solutions
To learn about our entire line of water-related smart products, click here
Water Leak Protection System
Smart Farm
Start Here!
- INTRO
- FEATURES
- BENEFITS
The features of our popular Valve Controller 1, now with multiple power options, and valve status input* . The controller comes with a plug-in AC-to-12VDC power adapter. This allows for several power configurations, including batteries-only, 120VAC power with battery back-up, and 120VAC power-only.
For even longer battery life, check out the X3 Valve Controller.
*YS5003S only, equipped with a compatible valve product. At this time, only 1-1/4 or larger motorized valves are equipped with a valve status output.
- Wireless operation; no 120V outlet or wiring required
- LoRa long-range/low-power technology offers 2+ years battery life, compared to 1+ year for other brands
- Alexa, Google, voice assistant, Home Assistant and IFTTT integration
- YoLink Control D2D device-to-device pairing allows for the Smart Motorized Valve to be directly controlled by YoLink water sensors or other devices, without an internet connection, and without power ("No WiFi, No Internet, No Power - No Problem!")
- S.D.I.M - Smart Device Integrity Monitoring means your smart device is supervised 24/7 for communication and device health. Should your device fail to communicate or have a device health issue, you can be notified (per your alarm strategy settings). Each device has a unique identification number and it is individually monitored by the YoLink cloud server, 24/7, continuously
- YoLink’s industry-leading long range communication (up to 1/4 mile, open air!) allows for operation in larger homes and in areas difficult for other wireless systems, such as basements, separate garages/structures, and even outside your home
- MANY WAYS!
- APPLICATIONS
- MORE APPLICATIONS
Many Ways to Control Your Valve!
Applications Gallery (4)
- Control of pressurized air
- General water control
- Remotely turn the water on or off at your condo, rental property, summer/winter home while not in use
- Prevent unauthorized use, by turning off water lines
- Use the YoLink Water Leak Sensor to automatically shut off the water when a leak is detected, preventing costly damages (Water Leak Sensor sold separately)
- Control your swimming pool water level. Add our Water Level Monitoring Sensor and automate water top-off
- Shut off water to your lawn sprinkler system during the winter months, preventing water from freezing in the pipes
- Automate pet and livestock watering, with remote control and preset schedules
- Connect the valve to HPT Hose Pipe Fittings, to connect to and control garden hoses, for control of lawn sprinklers and swimming pool water level (consider our Water Level Monitoring Sensor, for automatic water level top-off systems)
- Gray water dump valve for RVs
- SPECS
- DATASHEET
Valve Controller 2:
Housing IP Rating: IP66
Battery Power: Four AA batteries
Voltage Out: DC 12VDC
Standby Current:
.9 mA (on battery power)
1.5 mA (on external power)
Current Draw (Operating): 28.6 mA + device current draw
Power Supply Amperage: 1.0 Amps
Power Supply Cord Length: 59” (1.5 meters)
Environment Temp. Range: -4° to 122°F (-20° to 50°C)
Motorized Valve:
Power: 12VDC
Applicable Water Pipe Size: (Same as Valve Size)
Thread: Female NPT
Position Indicator: Yes
Manual Control: Yes
Valve Body Material: Brass
Actuator Material: Engineered Plastics
Open/Closed Time: Less Than 5 Sec
Suitable Media: Air, Water
Max. Torque Force For Actuator: 2 N.M
Cable Length: 0.5 Meters
Max Working Pressure: 145PSI (1.0MPA)
Working Current: Max 500Ma While in Operation (Opening or Closing; no Current Draw in Standby Mode)
IP Rating: IP65
Environmental:
Liquid Temperature Range: 35.6° to 194°F (2° to 90°C)
Environment Temperature Range: -5 to 122F (-15° to 50°C)
- INSTALLATION VIDEO
- INSTRUCTIONS
- FITTINGS
Simplified installation of a motorized valve. Your application will vary. See the included quick start guide and the full installation and user guide for more information. These documents can be found on the product support page and on this page in Documents section. Questions or need help? Please email us at service@yosmart.com
We recommend the SharkBite Male Push Adapter, which is compatible with most pipe types (and makes the job a snap!)
https://www.amazon.com/dp/B002STLKP0?ref=emc_p_m_5_i
- DOCS
- SUPPORT
- FAQs
Q: What are the differences between the YS4909, YS5001, and YS5003 Valve Controllers?
A: The primary differences between the YS4909, YS5001, and YS5003 Valve Controllers are in their battery life and power options:
YS4909: This valve controller has a battery life of up to 2 years, and it relies on battery power.
YS5001: This valve controller features an extended battery life of up to 10 years, providing longer-lasting performance without the need for frequent battery replacements.
YS5003: Similar to the YS4909, this valve controller has a battery life of up to 2 years. However, it also includes an AC adapter, offering an alternative power source besides battery power. It is also more powerful than YS4909.
Q: Does the YS5003 Valve Controller 2work with U.S. Solid valves?
A: Yes, the YS5003 Valve Controller 2 is compatible with 2 wire U.S. Solid valves only.
Q: Can the YS5003 Valve Controller 2 be used outdoors?
A: Yes, the YS5003 Valve Controller 2 can be used outdoors. The YS5003 YoLink Valve Controller 2 has an IP rating of IP66, which means it is dust-tight and protected against powerful water jets.
Q: What is the IP rating of the YS5003 YoLink Valve Controller 2? What is the IP rating of Motorized Ball Valve?
A: The IP rating of YS5003 YoLink Valve Controller 2 is IP66, the IP rating of Motorized Ball Valve is IP65.
Q: How can I close the valve when the sensor detects water?
A: There are two ways to close the valve when the sensor detects water:
Create automation in the YoLink app (requires internet connection):
When: Water leak sensor detects a water leak (triggers an alert)
Then: Valve controller closes the valve
Set up YoLink Control, make sure the firmware of the valve controller is 090e or newer (no internet required):
First, close the valve. Next, press and hold the set button on the water leak sensor until the green LED starts blinking rapidly. Then, press and hold the set button on the valve controller until its green LED also blinks rapidly. This establishes a direct connection between the devices without the need for an internet connection.
Q: Does YoLink Valve Controller support YoLink Control?
A: Yes, the YoLink Valve Controller supports YoLink Control, for example, enabling you to pair it with a YoLink water leak sensor. When the sensor detects a water leak, the valve will automatically shut off without requiring power or internet. However, if there is no internet connection, you won't be able to control the valve controller through the YoLink App, and Alexa routines will not function either.
Q: How does the YoLink valve controller operate a 12V valve with a 6V battery pack?
A: The YoLink valve controller uses 4 AA batteries, providing a 6VDC power supply. These AA batteries are commonly available and low-cost. The valve controller's circuit board includes a power boost IC, which converts the 6VDC input to a 12VDC output, allowing it to operate the 12V valve effectively.
Q: Is it necessary to cut off the pipeline for motorized valve installation?
A: No, it is not necessary to cut off the pipeline for motorized valve installation. The installation depends on the actual installation scene. Some water pipes have threaded connections, allowing the motorized valve to be directly screwed in. You can install the valve yourself or ask a plumber to handle it.
Q: What are the advantages of using a motorized valve?
A:
a. The controller directly controls the opening and closing of the motorized valve, ensuring accurate operation and preventing position deviations that can occur with a manipulator (such as incomplete opening or closing).
b. Motorized valves can be used to control water pipes up to 2 inches in diameter, providing flexibility for various pipe sizes.
c. The motorized valve is directly connected to the water pipe for installation, avoiding potential issues related to different pipe valve sizes that can arise when using a manipulator (e.g., insufficient height of the mounting bracket).
Q: The closed and open positions are reversed on my valve, and the app shows the wrong status. How can I fix this?
A: The reversed open and closed positions on your motorized valve are likely due to misaligned connectors between the female and male 2-pin connectors. To fix this issue, ensure that the slot between the connectors is properly aligned. This should correct the valve's operation and display the accurate status in the app.
Q: How can I set an alarm to notify me when the valve is opening or closing?
A: To set an alarm for valve opening and closing notifications, follow these steps in the YoLink app:
Open the YoLink app and navigate to the "Smart" section.
Tap "Automation" and create two separate automations: one for valve opening and another for valve closing.
For Automation1 (valve opening):
a. Set the trigger: "When device actions" -> "Valve controller" -> "Open".
b. Add the desired behavior: "Notification" -> "Custom notification content".
c. Select the alarm strategy: App, email, and/or SMS, as preferred.
For Automation2 (valve closing):
a. Set the trigger: "When device actions" -> "Valve controller" -> "Close".
b. Add the desired behavior: "Notification" -> "Custom notification content".
c. Select the alarm strategy: App, email, and/or SMS, as preferred.
By following these steps, you'll receive notifications when the valve is opening or closing based on your chosen notification preferences.
Q: Does YoLink offer lead-free valves?
A: Yes, YoLink offers lead-free valves in various sizes, including 0.75-inch, 1-inch, 1.5-inch, and 2-inch options. You can purchase these lead-free valves from their website or on Amazon, depending on your preference.
Q: How do I connect my valve controller to Google Assistant for voice commands?
A: To connect your valve controller and Bulldog ball valve to Google Assistant, follow these steps:
Open the YoLink app and go to "Smart" -> "Scene" to set up a new scene for opening the valve. Add behavior: "Valve controller" -> "Open".
Open the Google Home app and reconnect to YoLink. Next, go to "Routine" -> "Set up a new routine." Create a custom command for Google Assistant, such as "Hey Google, open the valve." Then, add action: "Adjust Home Devices" -> "Adjust scenes" -> add the "open the valve" scene you created in the YoLink app.
By following these steps, you'll be able to control your valve controller and Bulldog ball valve using voice commands through Google Assistant.
Q: Can I configure the Power Fail Alarm using YoLink Control D2D to turn off a water control valve in the event of a power failure?
A: Yes, you can set up YoLink Control between the Power Fail Alarm and the valve controller to turn off the water control valve during a power failure. Follow these steps:
Close your valve.
Press and hold the set button on the Power Fail Alarm for 5 seconds until the green LED starts blinking rapidly.
Press and hold the set button on the valve controller for 5 seconds until the green LED starts blinking rapidly.
By following these steps, you can configure the Power Fail Alarm to automatically turn off the water control valve when a power outage occurs.
Q: How can I automatically open the valve after the water has been removed?
A: You can set up an automation in the YoLink app to open the valve after all water sensors stop detecting water. Here's how:
Go to YoLink app -> Smart -> Automation -> create a new automation.
Choose the trigger: "When valve - close."
Add Behavior 1: "Break if when water sensor 1 - detected water."
Add Behavior 2: "Break if when water sensor 2 - detected water."
Continue adding similar behaviors for all your water sensors.
Add the final behavior: "Valve - open."
This automation will open the valve when it is closed and all the water sensors have stopped detecting water.
Q: I did not receive any notice that the valve had closed. Why did I get this still open notification?
A: The "still open" notification is designed for situations like watering, where it serves as a reminder to users that the valve remains open. If you have set up this feature on your main valve, you may receive this notification even if you did not close or open the valve. To avoid this, you should disable the "open remind" feature for your main valve.
Q: I am trying to direct pair (D2D) the valve controller and the water leak sensor, but the valve controller does not respond when the water leak sensor detects water. What can I do?
A: Before attempting the D2D pairing, make sure your valve is closed and you can follow the instructions in this video for the pairing process: https://www.youtube.com/watch?v=dD6oNUzuxSE. If you still encounter issues after following these steps, consider reaching out to YoLink customer support for further assistance.
Q: My ball valve controller shows as offline in the app, even after replacing the batteries with a different type. Is there a workaround to get it back online?
A: First, make sure your YoLink app is up to date. Then, remove the old batteries and press the button several times to discharge the capacitors before installing new, non-rechargeable batteries. If the issue persists after these steps, please contact YoLink customer support for further assistance.
VIDEOS (5)
- CUSTOMER PHOTOS
- CUSTOMER REVIEWS
- PAYS FOR ITSELF: WATER LEAK
- PAYS FOR ITSELF: INSURANCE
- PROPERTY MANAGERS
- HOAs
- RENTAL & CONDO OWNERS
- CONTRACTORS
- INSTALLERS
- PLUMBERS
Stumped?
Contact us. Don't worry; this is what we do.
Use the chat service, email us at service@yosmart.com or give us a call:
831-292-4831
Please note, while phones are answered 24/7, U.S.-based phone support is only available during our Irvine office business hours
(9AM to 5PM Pacific Time)